I just want a keyring.


I need a new keyring.  I haven’t ever been able to find one that meets my needs.  Perhaps my expectations are too high.  Perhaps there is no such thing as the perfect keyring.  Perhaps I need to spend more money on one.  Why is it so difficult?  Does anyone else have a keyring problem?

I guess I should explain myself.

I have a lot of keys.  I like to keep them all in one place.  I want a keyring where I can break-off my car keys & my wife’s car keys quickly & easily.  I recently bought a keyring that has a bunch of little carabiner-looking S-clips on it.  Let me show you:

Ridiculous Key Ring

Ridiculous Key Ring

Besides the fact that I have entirely too many keys, this keyring set up is juts not working out.  I want something that makes the vehicle keys quickly & easily removable.  I don’t want them to fall off on their own.  Arrow A shows one of the broken little S-clips that snags my pocket constantly.  These have also broken themselves free inside my pocket… or on the way out of my pocket.  I’ve dropped my house key on more than one occasion with this setup.  Then again, arrow B points to a traditional keyring provided by the dealer…  which has also come loose in my pocket.  I spent about 20 minutes looking for my keyless entry remote the other day after it loosened itself & ended up on the floor of my truck.

Apparently, when you pull keys out of your pocket, they help turn any loosened items into projectiles.  It’s just a matter if time until this happens over a storm drain or sewer grate.

There is the old-fashioned normal keyring, but I always seem to be able to only find weak ones… or ones that make it nearly impossible to just give the guys at the oil change place your truck keys and not some crazy giant bundle of chaos that might scatter my keys all over the place.

I’ve also tried those quick-release keyrings, but they eventually fail too when the spring dies.  Then there’s the “lucky line” kind, but it would throw some being easily removable out the window.  I’m at a loss as to what exactly the next step should be.

Keyrings

Keyrings

What do you do?  Do you have keyring problems?  Am I alone on this key-dropping crap?  Your advice would be welcomed.

Dear Chick-fil-A, I have an idea for you…


I plan to send this to Chick-fil-A, and we’ll see where it goes.  I just realized, I’ve written about Chick-fil-A several times here before.

Dear Chick-fil-A,

I have an idea for you.  I realize that as a giant corporation you probably don’t accept unsolicited ideas, but please don’t let that stop you from considering this idea.  I don’t expect monetary payment, maybe just free Chick-fil-A for life?  (Maybe a limit to once a week?)  Well, I guess I should present my idea before we start talking payment or barter.

This past Saturday I went to the Chick-fil-A in South Hills to grab some of those ridiculously delicious Chick-n-Minis™ for breakfast.  I went into the store to order take-out so I could grab some mayo packets, ketchup, straws, & napkins at the little condiment station.  I got two drinks because I was taking breakfast home to share with the wife.  I opted for your highly addictive sweet tea, and the wife had a Hi-C Fruit Punch.  The always courteous employees offered me a drink carrier, and I accepted.  I thought it would make life easier on the ride home.  I saw wrong.

I set the drink carrier on the floor of the passenger’s side of my truck.  As I backed out of the space, it fell over on to the long side.  Your drink lids are thankfully quite tight, but sadly not entirely waterproof.  I leaned over and placed the carrier & drinks upright again, this time turning the drink holder 90 degrees the other way thinking I had outsmarted the laws of physics and that it would stay put.  I could not have been more mistaken.  As I turned up a hill to go out the back of the parking lot, it fell again.  I believe I uttered something using vocabulary that you may not approve.  At the stop sign, I had to pick up the cups and give up by putting them in the truck’s drink holders.

As I drove home trying not to think about the drops of Hi-C & iced tea soaking into my floor mats, I wondered if there was a better way.  I certainly like your drink carriers much better than the egg-crate 4 space things that just let cups lean over all willy-nilly.  I came to think that your drink carriers just need feet.  I thought the feet may take some extra cardboard, and wondered i something could be done with the existing design.

At home, my thoughts were fueled by poultry protein.  I pulled out my pocket knife and started cutting as my wife looked at me like I was a crazy person (as she does quite often).  I explained what I was doing and why and she actually also thought it was a good idea.

You already have some nice sturdy cardboard.  Two well-placed quarter-circle cuts & maybe even a fold mark in the middle of the carrier would create some nice sturdy feet or “wings” or your drink carrier box without the need for a complete redesign or any additional material.  I tested it by trying to rock the mostly empty drinks back & forth on the kitchen table.  We had no spills.  I am willing to try some field tests if you’d like to move forward with this idea.  My truck’s floor mats can handle it.  Perhaps I can even use water instead of red & brown sugary liquids.

I’m sure we could talk to your box people & find out if this is doable for a reasonable price.  I think it will be as important & innovative as the new Heinz® Dip & Squeeze® packets!  I have some photos attached that I’m sure you will agree are quite illustrative of my design ideas.  Sadly, my pocket knife is a cheap dull one, so the cut looks more like a rip.  I believe you’ll see my intent though.

I look forward to hearing your thoughts, and am excited at the opportunity that lays before us.  It would be my pleasure to help make this dream a reality!

Eat Mor Chikin!
-Eric

And the attached photos:

So, there we have it.  I mean, most of my letters are plain goofy, and this has a goofy tone, but really… don’t you think this would work? Now, we wait for a response.

 

Go ahead, push the button… I dare you.


You know I hate public restrooms.  This sign may be a wave of the future.  Think it’s a good idea?  Think it will work?  Is it too easy to abuse?

Cleanliness is important to all of us...

Intimidating button…

I saw a full garbage can, & thought about pressing the button…but thought it may only be for emergencies not maintenance.  I didn’t want to be the guy that whined about the garbage can being full.  Then again, I’d rather empty a trash bag than pick it up off of the floor if I were an employee there.

Is a button the way to solve all of your bathroom problems? This reminded me of the pull-strings in hospital bathrooms.  Ha ha.  If you find one of these buttons, I dare you to push it & yell “I need someone to wipe!”

Horrible Christmas Presents…


So if you’re looking for a Christmas, Hanukkah, Ramadan, Kwanzaa or Festivus gift… You may not want to go with these, unless you’re trying to give some kind of hint that you don’t like the recipient. I’ve heard them advertised on the radio lately, and they’re both just ridiculous.

Go nuts over Fresh Balls!

Go nuts over Fresh Balls!

Fresh Balls – “So Fresh. So Dry.” | It is what it sounds like. Some kind of deodorant, lotion, or talc for application to your apparently sweaty coin purse.  Maybe I’m not active or sweaty enough, but I’ve never considered this a real problem.  They advertise buying it for someone as a gift.  Who’s damp smelly package are you close to on a regular basis?  I have some good friends, and I’ve thankfully never smelled their family jewels.  If I ever do smell someone’s nether-regions, I’ll be sure to tell them about Fresh Balls.

✔ Badass colors ✔ Badass patterns ✔ Badass warranty

✔ Badass colors ✔ Badass patterns ✔ Badass warranty

Seats of Anarchy – “Custom toilet seats for hard asses.” | I love some good terrible wordplay, but the name is almost as atrocious as the idea. I’ve never watched Sons of Anarchy, but do they poop a lot?  If they did, I could see the point to this then.  If your man cave is your bathroom… maybe this would be appropriate?  Someone better get their Copyright and/or Trademark lawyers on this pretty quickly.  Nothing says badass like a camouflage toilet seat, or one with barbed wire.  Guarantee that all your guests will hover!  “Designer” toilet seats for manly men and bikers…  It sounds like a crappy idea.  Get it?  Crappy?  Toilet seat?  Ugh.

So, what have you seen lately what would make a horrible holiday present?  Anything as bad as (or worse than) these?

“Our hot air poppers are not designed with an on/off switch.”


Didn’t I just email & tell you that?  I think I did.

Perhaps I’m getting ahead of myself again.  Did you read all about the Evil Popcorn Popper?  It wants you to tempt death by electric shock each time you feel like making a tasty air-popped snack.  Others chimed in on Facebook with their tales of appliance treachery.  In the comments, I formulated an email. I sent it.  Here it is:

Hello Presto®!

I recently bought one of your popcorn poppers because we had one when I was a kid and air-popped popcorn is always better than that microwave stuff. We can agree there, right?

I have a few questions about your design choices.

First… The butter tray. Why doesn’t any butter that I put in it melt? I’ve tried actual butter and “I Can’t Believe It’s Not Butter!®” both to no avail. Did you guys test this out in the factory? Does anyone there own one of these poppers? They’ve never pointed out this problem? I can certainly melt it in the microwave, but it’s amusing to me that the popper has a butter tray that clearly doesn’t work (even long after all the popcorn has popped). Yes, I have sat there stubbornly for a while waiting for the butter to melt for many minutes after the last dead kernel spits out of the popper. When I was a kid, our popper had a metal tray. I think it did a better job of conducting heat & melting the butter. I think it even fit an entire artery-clogging stick (as long as my parents or the babysitter weren’t looking). Do you guys have any poppers for sale that actually pop popcorn AND melt butter? I’d like to see one.

Second (and more importantly)… The power switch, or lack thereof? It’s kind of scary. You guys seem to gloss over it on the video located on your site: http://www.gopresto.com/products/products.php?stock=04820

Is that guy a chef and an electrician? Is he certified to plug in live wires? Do you guys not see the spark(s) when you plug the thing in? Have you ever actually plugged one in? Do you feel that it’s dangerous? I almost want to plug it in to a mulch-outlet power strip with an on/off switch and use that to turn it on so I don’t accidentally put my thumb in between the prongs as I’m plugging it in.

Speaking of switches, you can get a nice rocker switch from Grainger relatively cheaply: http://www.grainger.com/Grainger/CARLING-TECHNOLOGIES-Rocker-Switch-1A822

I’m sure you can get them even cheaper if you buy in bulk… and I’m sure they’re not all that difficult to install.

Can you imagine if other electrical products didn’t have an on/off switch? Toasters? Curling irons? Hair dryers? (They almost all come with circuit breakers now!) Electric knives? Electric hedge trimmers or weed whackers?

You really don’t feel that it’s dangerous? Not so much as a warning label adorns the power cord? Do you use gloves to plug yours in? Why was the plugging done off camera in the video?

I really look forward to your thoughts on these issues. I might go make some popcorn while I wait. I’ll be sure to melt the butter in the microwave first, and I hope I’m not electrocuted when I plug the popper in so I can read your reply!

Inquisitively,
-Waldo

This was the reply:

From: Presto Customer Service <contact@gopresto.com>
Date: Thu, Nov 29, 2012 at 3:01 PM
Subject: RE: Where’s the switch?
To: Waldo Lunar <world.and.lunar.domination@gmail.com>

Good morning,

I’m sorry to hear of your dissatisfaction with your hot air popper.    We have not received complaints of butter not melting in the butter melter.  Please note that the instructions do indicate that soft/room temperature butter or margarine needs to be used, refrigerated butter will not melt during the short popping period.  I do not recommend that you let the unit run after the corn has popped, as this could cause the unit to overheat.

Our hot air poppers are not designed with an on/off switch.  I talked with our Quality Manager and he indicated that there are no plans to change the design to include a switch.  The unit has been tested very thoroughly and meets all UL mandates.  If you read and follow the instruction manual,  you can feel assured that this appliance is safe to use.

Have a good day.

Colleen
NPI Customer Service
Shipments made to U.S. or Canada only

Well, that was unsatisfactory.  Letting it run empty to melt butter is bad, but plugging in a live appliance is OK?  I call shenanigans.  Shenanigans because we keep butter in the ‘fridge, and shenanigans because plugging something in that sparks feels kind of dangerous.

I do find the sentence “I talked with our Quality Manager and he indicated that there are no plans to change the design to include a switch” highly amusing.  They had a discussion about my email.  This has never come up before?  Say it with me: Shenanigans.  I’d like to know what the quality manager really said.

Who exactly are Underwriters Laboratories and why do they put their logo on everything?  How did they decided that plugging in a live wire is safe?  Maybe I should write to them and ask about it?

⚡⚠⚡ The Evil Popcorn Popper ⚡⚠⚡


A while ago I bought a popcorn popper similar to one we had when I was a kid.  It’s a rather simple appliance, and I have many fond memories of making a mess by trying to use a bowl that was too small and putting way too much butter on it.  I still like popcorn, and the stuff from a popper is leaps & bounds more awesome than the microwavable kind (but not as cool as the little foil pan that puffs up when you hold it over an oven burner).

Presto® PopLite® hot air corn popper
Presto® PopLite® hot air corn popper

I have a popcorn popper that looks a lot like the one in the photo, I think it’s a Presto® PopLite® hot air corn popper.

The one we had when I was a kid was a little fancier… it had a cup that you filled with a trap door where the butter cup here is… and a butter tray made of metal about the size of a stick of butter in front of that. The one pictured here is like the one currently at home, and it sure doesn’t melt butter… even if you leave it long after all the popcorn has popped.  Did anyone test this at the factory before they boxed & shipped it?  No one that works there has ever tried to use this thing?

One similar feature to the one I remember form my childhood is a distinct lack of a power switch.  Don’t believe me?  Check out the video from their site:

One of the first things you learn as a child after the word “no”, not sticking things up your nose, and not eating stuff you find on the floor is to not stick your fingers (or anything else) into an electrical outlet.  Everything else comes with a warning label. directly on the electrical cord.. like your hair dryer, a toaster, or even a lamp.  This thing just plugs right into the outlet with a crazy little spark and a jarring whir of sound.

Perhaps one has to be a chef to operate the thing?  Maybe the guy in the video is just in a costume, I don’t know.  Maybe he’s an electrician.  Do they have professional popcorn chefs?  Was he trained to properly plug a live cord into a receptacle?  I like how they don’t show you that part.

I can’t think of anything else that’s on as soon as you plug it in.  You can buy a rocker switch rather cheaply.  Are they that hard to install?  Are they that much more expensive?  Should I write to Presto and ask them why they let his dangerous chaos continue?  I just might.

What kind of popcorn popper do you have (if you have one)?  I’ve never tried one that uses oil… or on of the ones that looks like a tiny cart.  Do you have a tricky death-tempting popcorn popper at home, or any other appliance that dares you to dance with 110v?

Dear Hotel Architects…


I’m not an architect, or a contractor, or even a toilet salesman… but I think I’ve found a flaw in a certain type of hotel room / bathroom setup.  I’m no germaphobe, but I believe this design to be quite unsanitary.

This slideshow requires JavaScript.

What design?  The sink outside of the bathroom design.

Sure, it’s convenient to shave or brush your teeth while someone else is pooping or showering… But at what cost do we purchase this convenience?  The cost of a bazillion tiny germs all over the inside of the door handle after you wipe and before you wash your hands.  Sure, you can grab an extra wad of toilet paper for your journey outside.  How many people do that though?  How much microscopic fecal matter is already on that door handle?  Did the maid think to wipe it down?  What if you forget after you get out of the shower?  You just washed yourself, and now your hand may venture into a feculent festival of filth.

Am I doing something wrong here?  Am I missing something?  Let’s get this right so I don’t have to touch poop-encrusted (albeit microbial poop) door handles.

Ernie and the Berts “EveryBody Poops” [Video]


Have you seen this yet?  It’s a work in progress.  We need your feedback.  Comment here, on ErnieAndTheBerts.com, or on YouTube Please?

Thanks to Howler’s and their new recording setup for this awesome video!

So, I need help with my résumé.


I rarely ever blog about or post on social media about work.  My work life is work, and my personal life is personal.  I’ve never felt the need to discuss, vent about, or provide detail about my job.  I’m going to go ahead and break with that for this post.

Unfortunately, the time has come where I need to update my resume.  About a year and a half ago, the company that I was working for was sold, shut down, & liquidated.  A core group of people decided to try to move on & start a company in the same industry, and I was invited to be a part of it.  I was honored to be asked to participate, and glad to be gainfully employed.  Sadly, things didn’t pan out as planned, and the company is also in the process of shutting down.  Basically, I’m no worse off than I was a year ago.

At that time, I had an updated resume, and went on my first job interview in a long time.  I was offered employment elsewhere.  It may have worked, but the pay wasn’t where it needed to be for me to comfortably continue to pay rent and put food on the table.  I went with the group I knew & salary I needed.  I have no regrets, I’m just illustrating that I don’t have much job interview experience, but it has mostly all been positive.

Basically, I’ve been at the same job for 10 or so years.  In 2002, I started at an a/v integration company as the shipping guy.  That company was purchased in 2005 and I was hired by the new company, which closed in 2011.  Then on to the newest one where I was doing all slight variations of the same thing.  I liked my work, it was a nice mix of desk/paperwork & physical warehouse work sometimes, it was always different & challenging.  I have learned many rules, processes, & things about the equipment over the years.  I was able to adapt to many changes, and survived them all (up until now).

I need help with my resume.  I think I first updated this format in 2005, when it looked like I may have needed to search for other employment.  (Luckily, I was able to work temporarily for the new company, proved my merit, and was hired full time.)  In 2012 this format may be stale.  I’m not big on titles.  I call myself a “shipping guy” but I do much more than that.  I have more skills than a simple shipping guy needs.  I hate phrases like “team player”.  I am, but it sounds goofy.  Who reads that & doesn’t roll their eyes?  I’m generally not boastful (other than in jest), but this is one time when you need to be.  There’s a lot riding on a resume.  It gets your foot in the door.

I’m confident in my writing (thanks to this blog), but thrown into a resume it looks braggadocios, fragmented, & boring.  I love bullet points, but breaking things down into them, I feel like I lose cohesion.

I need this to grab someone’s attention, highlight what I can do & what I can offer, and get me a job.

Eric AiXeLsyD with the Batmobile

I have a lot of skills in my utility belt.

What do I want to do?  I’m certainly qualified for shipping, warehousing, and inventory jobs… entry level or supervisory.  Sadly, entry level pay may no longer be acceptable.  I could certainly do something else though.  I’m a quick learner.  I’d love to get paid for this writing / blogging / insanity thing (I mean… show/album/food reviews, photos, humor, goofy letters? I can do a bunch of stuff there).  Unfortunately I don’t have a degree.  Can you get one in shipping?  Certainly 10 years experience in shipping I would have learned anything that I could in 2 or 4 years of school?  I do have some training in graphic design & commercial art, I have experience in drafting (by hand even… does anyone remember that?), some talents that have yet to get me paid like drawing mazes and photography, and I recently completed classes in Microsoft Project… so I could even fill a “Jr. Project Manager” type role where I can learn as I go.  I’m certainly adept with computers, know old school (& also useless) html coding, and can pick things up rather quickly with any kind of program.  I can promote things like my band, the blog, and Food Allergies like mad online.  I think I’d be a good PR person, I just lack formal training or experience.  Maybe it’s time for something different.

So, I need help with my resume.  What works, what doesn’t?  1 page?  2 pages?  If  so, how do I fit it all on one or to pages (I think it kicks into an atrocious 3 now)?  What do I need to express?  Do I need a cheesy cover letter?  Do letters of recommendation help?  References right on the resume, or “provided by request”?  3 Personal/3 professional?  3 total?  Cover letter?  No cover letter?  Cover paragraph?

I’m laying it all out here and asking for your help.  Take a look at this resume and tell me what you think?

Please help me with my resume!

Click to check it out at Google Docs

Please excuse the format, it needs a new look… something anyway, and Google Docs may have messed with it a bit.  Other than that though… I ask you to be honest, brutal, constructive, and hopefully helpful.

Also… know anyone that’s hiring?  Are you hiring?  Point me in the right direction here.  I’m confident in my in-person interviews, and with anyone that already knows me or has worked with me.

Thanks in advance for your help.  I need to start hitting up InDeed, PA Career Link, etc. with my resume.  I know I have a lot of friends, family & readers that can help me out here.  It would be crazy to not use all of the resources at my disposal, right?

Hamburgers vs. Meatballs vs. Meatloaf?


This thought came to mind while making hamburgers for the holiday.  I remembered the commercials for ranch burgers & I had a packet of the ranch dressing mix, so I looked up their recipe.  It contained breadcrumbs.  I always thought breadcrumbs belong in meatballs or meatloaf, but not hamburgers.  Then there’s egg.  I put it in meatloaf but not in meatballs or hamburger.  They’re all almost the exact same thing… but then they’re all completely different.

I generally always throw them all together without a recipe.  They’re easy to do that way.  I guess everyone has their own way to do things.  I make them all the same sometimes, but sometimes I add something different for fun.

I’m just wondering how other people do things?

I’d love some feedback in the comments below.  I’ll share how I generally do things.  These aren’t really recipes, and I don’t measure much, but this is typically what goes in each:

Hamburgers

Meatballs

  • Ground Beef (Sometimes Turkey)
  • Crushed Croutons (Whatever we have for the salad if we’re having one, or a nice mix of spices or whatever.)
  • Parmesan/Romano “shake” cheese
  • Kraft Roasted Red Pepper Italian Dressing (It spices them well, keeps them nice & moist!)
  • Black Pepper

Meatloaf

  • Ground Beef
  • Egg
  • Bread or crushed crackers.  (I like the bread ripped up more than the crackers.)
  • A1, Ketchup, Mustard, or BBQ sauce… or a combo of all of them.
  • Season All
  • Black Pepper

(Click here for a crazy meatloaf recipe.)

Of course sometimes I add garlic, or onion powder, or something crazy.  That’s the fun if it though, isn’t it?  So, what goes in your meatballs, hamburgers, or meatloaf?

Raw Ground beef

Raw Ground beef (Photo credit: Wikipedia)