So, I have been testing the Birdfy Feeder Cyan & Birdfy Nest Cyan (both Walmart exclusive) for a while, and the Cyan feeder’s built-in solar panel recently popped out of the roof. I’m guessing a raccoon was trying to open the lid. I posted about it in theNetvue Birdfy Community Facebook Group, and Birdfy reached out right away to offer a replacement. The Cyan and the nest that I had been testing had the Birdfy 2 camera installed, Not sure if the replacement has that, or a camera more like the original Birdfy Feeder or Birdfy Camera.
WANTED: 🦝
They sent a Birdfy Feeder Ebony as a replacement, and the construction is notable better than the test run! This one has a magnet mount so you can access the camera without having to have an empty feeder (which is one of the issues that I had reported to them on the test run), and this solar panel mount can swivel and it’s hinged so you can find the best angle for your location. This feeder is great if you’re looking to test out Birdfy products. It has a matching Birdfy Nest Ebony too!
Birdfy Feder Ebony
The Naughty Gnome NosheryBirdfy Feeder Ebony & Birdfy Camera pointed at the squirrel feeder.
That’s a Birdfy Cam behind the ebony feeder pointed at my squirrel feeder picnic table.
Birdfy Feeder Ebony Close-Ups
The Naughty Gnome Noshery – Sign on the perch & the gnomes it’s named after.
If you have any questions about any of the products that I own, pop them into he comments and I will do my best to answer. I may even be able to help with mounting or what kind of seed mix. I can’t offer support or how to be a product tester, you would have to contact Birdfy for that.
I learned through Google (with help from Gemini) that the male Carolina Wren will start to make several nests in suitable spots before courting a mate. He started putting in some materials a few days ago, but this is the first time I have seen him on camera since. (I put in the peanuts in the meantime.)
Apparently, if he successfully woos a female, he then lets her pick the most suitable of his locations, and they will continue to build the nest together. These alternate locations can be used to mark his territory, confuse predators, and act as a quick location to start from again should they decide to move.
Mine look a bit different from the final product, but I was able to test them out and provide some feedback. They have a built in solar panel in the roof, which keeps them mostly charged after the initial charging. I have had to give ’em a boost over the winter.
The feeder has been busy from the onset as I put it out to replace a traditional feeder that I have had for years. As for the nest… A woodpecker tried to make the entrance wider, and some black-capped chickadees have popped in & dipped right out. Other than that, the nest has not seen much activity until recently. Perhaps spring is the best time.
I did notice mine have the Birdfy 2 camera, and the ones pictured at Walmart’s website seem to have a different camera or at least camera housing. I do think the seed tray is a better design than my Birdfy Lite Feeder, as the seeds don’t tend to stay in the tray, get wet, & clump together.
I don’t think that works with the Walmart exclusive products, but in the links above I tacked on “?=ref/AiXeLsyD13” anyway just to see what happens. I have asked for a coupon code through GoAffPro, but have not heard back yet. So, maybe someday?
If you’re interested in the feeders, it’s a good product whether you use my link to buy or not!
You can check out my YouTube playlist mostly from my feeders(& some from the house cameras), and some other blog posts I have made about Birdfy products below.
If you have any questions about bird feeders, cameras, feed, birds, or Birdfy products, don’t hesitate to ask in the comments, via my contact form, or social media. (I’m AiXeLsyD13 pretty much everywhere.)
I have really enjoyed seeing the wildlife in my backyard through my Birdfy Feeder & my Birdfy camera (& the accessories). The folks at Birdfy reached out to ask if I would like to test a new product, so of course I said yes! I have been using it, sharing my camera feeds with the company, & providing feedback for a while now with the company, & uploading photos/videos to a private Google photos album. It was exciting to see them respond & change features/settings as the testing went on. They really improved tracking, AI recognition, & picture/video quality rather quickly.
It has ben hard to keep quiet about it & not share the video or photos!
As a company, they’re constantly reaching out to solicit suggestions on product ideas, design, features, and more. They have recently updated their app to enable editing of AI tags as per customer suggestions.
I’m relieved to be able to share the fact that I have been helping to test the new camera, & to finally share the photos/video.
🐦
I need to make a blog post when I get time, but if you're looking to get a camera birdfeeder, and you like my videos, please consider buying a Birdfy by Netvue, and doing so with this affiliate link:https://t.co/KBCtDHH9D1
Here my son helped me film the unboxing/setup, if you want to see a really poorly edited video. I have set up over 7 Birdfy cameras at this point through the app, and all of them have been really simple.
The one that was sent to me has two cameras, the Birdfy 2, & the Birdfy 2 Pro, and it’s a Duo feeder with the Pro camera mounted in the middle, and the 2 mounted on the side. It also came with a solar panel. I mounted it on a pole that I had purchased from Amazon.
The Birdfy 2 Duo Feeder with the Birdfy 2 Pro & Birdfy 2 cameras.
I like the looks of it, and the color when compared to the original feeder. It just seems a bit more elegant or classic of a design. The bamboo feeder is really nice looking, too. I also like that the lid of this newer model opens up & back, so you can see better into the hopper as you’re filling it… and that the cameras are wholly independent of the housing for ease of access. I have removed the two plates per Birdfy’s request, as the bords seem to have more room to perch without them in the way.
The cameras take a while to charge at first, but the solar panel typically keeps it close to 100%. Occasionally, I do have to bring a camera in for a recharge across all the products. (I don’t have a nest or a hummingbird feeder yet, but maybe someday.)
The app is easy to navigate from the setup of the cameras, to checking out the various videos and photos captured. It has a daily highlights feature, and a monthly recap. The FB community is great for ideas and seeing others’ setups and the birds (& other animals)#CaughtOnBirdfy, and Birdfy support is incredibly responsive.
The video & photos are what shines here, though. The Pro 2 has two cameras, one that moves & tracks the birds. Videos can be downloaded, shared with the community or “collected” in the app, and you can see both cameras at once from the live view. I had to quiet the notifications, because I literally get them all day. The AI bird recognition is pretty good, and getting better, especially now that functionality for correcting the tags has been implemented.
Photos from the Birdfy Duo Feeder with the Birdfy 2 Pro & Birdfy 2 cameras.
🥜
If you have any questions about the feeders, my setups, or anything related to this… don’t hesitate to ask in the comments or reach out on social media. I enjoy vegetable gardening, keeping a nice backyard, and living in harmony with nature even here in the suburbs. These feeders add to the enjoyment. I don’t have to be outside all day to catch a glimpse of nature at work. I try to plant flowers for the pollinators, I’m working on a birdbath and may eventually make a little pond. I have bee/butterfly baths & bug houses.
Bird people seem to be mixed on the squirrels & chipmunks though. I love to watch them, too. Ha ha. I have a squirrel feeder out with a camera trained on it, but may use a Birdfy camera to build into a squirrel feeder eventually. Maybe a barstool style feeder? I’ll have to fortify the wires, as sometimes they can apparently chew them and be quite destructive.
🐿️
I am in the suburbs just south of Pittsburgh, PA, and I use a varying mix of fruit & nut mix, dried mealworms, a songbird seed mix, sunflower seeds, & sometimes some hot pepper seed mix or cayenne pepper or chili powder. The latter tends to keep the squirrels at the squirrel feeder, but the dust can smudge the camera lenses sometimes. I also tent to put out peanuts and corn for the squirrels (although that pulls in raccoons & deer, too).
You can poke through my whole playlist, or see some videos from just the Birdfy 2 cameras here:
I had some time recently, and I wanted to see what the process was to publish a print-on-demand book from Amazon. I grabbed a bunch of my smaller easy mazes with no discernable theme that I had previously posted here & on Instagram, and assembled them into a book. All of them were scanned in & maybe fixed a bit with paint.NET, and I put the pages of the book together with OpenOffice, so my only cost came down to the pens & paper. (Not sure how to quantify time & sanity.)
Yup, I finally did it. After drawing mazes for decades.
It was very simple to publish with Amazon. This gave me the confidence to put together another book, perhaps with a bit more coherence, and definitely with a much better cover. I have already started drawing new mazes in a neat little box template so they’re a bit more consistent. What’s a good number? 30? 50?
Also, I need to get all of these older mazes scanned & into a book too. I have some pages that are bigger than my scanner bed though. Perhaps a trip to FedEx Office or Staples is in order.
I just kind of set the price arbitrarily to make a little bit off of publishing. I’m not looking to get rich, but it would be nice to finally make income of off artistic output after decades of ostensibly doodling. (I won’t delve into my musical endeavors which are break even at best but probably a negative sum game. 🤣)
Luckily the creative outlet for me is just that, an outlet. I think we all need to express ourselves artistically or through sports, gardening, or other hobbies.
It also suggested I make a Kindle version, so I did that too. I am not sure if the concept will work there. Can you draw on a Kindle screen with a stylus or your finger? Can you print from a Kindle? I must confess I don’t have one. I am still a fan of books in the traditional form.
If you have ever enjoyed my mazes, or have been one of the awesome people that has completed them and sent in the solution – I humbly ask you (if you’re so inclined) to purchase a paperback for around $6 or a Kindle book for around $3 and let me know what you think. Should I do more? Did you enjoy it? Is the quality any good?
Really, I ask you to try even if you have never solved one of my mazes. Now is a good time to start!
It might make a good gift for kids or adults. It’s a nice way to pass some time or zone out.
If you do buy, can you leave an honest rating/review? I feel like that goes a long way with Amazon.
If you can’t buy or are really not interested, that’s OK too! I would ask you to maybe share the link around.
My thoughts on the next one are that I probably need a table of contents, to maybe title the mazes, and… should I include the solutions in the back? That’s one of my issues. I like to draw the mazes, but don’t really solve them. I may need to reach out for help on that part & pay someone to complete them so I can include the solutions (and make sure they’re solvable).
I probably need help with a title, too.
Thanks for reading, tanks for considering, and please share this link on every social media platform known to humankind: https://www.amazon.com/dp/B0CH2FMH7W
So, remember the SPAMP+? It was a ton of fun. I wrote to ask the SpampMAN if I could get a ¼” stere-to-mono adapter for the headphone jack to make the headphone jack essentially an “out” for a guitar amp so I could use the Spamp+ as an effect or pre-amp.
Dude is solid, and sent me one! He may include it as an option with future builds! The grilled, chilled, & fried all work as you would expect and sound gorgeous coming through my Blues Jr.
Here I used my New York Pro StarGazer (with GFS Lil’ Killer Rails) into the SPAMP, then my Fender Blues Jr. The tones are still awesome! the volume differences are there, but if you pick one & go that rally shouldn’t be a problem. This is totally cool as a pre-amp effect! There’s no on-off, but I do have an A/B/Y switch that I could maybe use to put it in & out of the loop. At any rate, this is still super fun, and that’s what it’s all about!
Juts some thoughts posted on Facebook at Twitter that I thought I’d also share here. I feel like its been a long time since I posted any food allergy content.
In case I ever make the FB stuff not public:
As a proponent of Food Allergy advocacy, this is concerning. You would think that responsible reporting from CNN would include the triggering protein(s) of those that suffered an anaphylactic reaction. I call shenanigans on it not being immediately obvious, let alone warranting further research or investigation.
From what I have read about allergies and vaccinations in the past, sometimes they contain egg protein. Personal results can vary… much like some people with peanut allergies report deep fryers with refined peanut oil trigger a reaction, and others seem to not have any ill effects.
Is this that same type of issue, or have new ingredients or a new combination of ingredients been introduced?
Obviously this is something that would be sussed out and analyzed over time in a clinical trial with a more traditional timeline.
I look forward to keeping an eye on this and how it progresses. Is it approx 1 in 30 kids any more have a food allergy? This could potentially affect a large portion of the population.
Is a vaccine a more viable solution than actual produced human antibodies, or are they one-in-the same here?
Keeping an eye on the Pfizer/BioNTech vaccine and the others to follow.
While by no means a scientist of medical professional, I find this stuff fascinating.
I also would hope the comments here don’t devolve in to anti-vax or mandatory-vax sentiments.
Oh man. Does anyone remember my W(aL)D email shenanigans from a decade ago?
One such adventure was writing to Totino’s to ask if they had recommendations for microwaving more than 6 at a time. They wrote back. I asked them if I needed to arrange the rolls like wagon wheel spokes or like wagons on the Oregon Trail circling for protection. I even got some 35¢ coupons that I considered as a research grant.
Have you noticed pizza roll cooking instructions lately?
I won!Information for the people!Research to benefit the masses!
Really though. This brings up a new series of questions.
When did just arranging in “a single layer become” acceptable? Who does Totino’s think they are discarding the time-honored tradition of microwaving things in a circle? Did we learn nothing from our ancestors at Stonehenge? Did they consult the Softstix team over at SuperPretzel, or just roll forward (pun still intended) with wild abandon? How do you summon the flavor spirits without the ceremonial circle?
Has the Fibonacci spiral ever been tested as a cooking pattern? Can Ci3 make me a plate specifically for microwaving pizza rolls and little cheese-filled pretzels with the Fibonacci spiral on it?
From: Chick-fil-A CARES <chickfilacares@na.ko.com>
Date: Wed, Dec 26, 2012 at 8:09 PM
Subject: Chick-fil-A Response
To: <me@my.email.address>
Dear Valued Customer:
Thank you for taking the time to contact Chick-fil-A. You are very important to us, and we appreciate your suggestion regarding the cup holders. We hope the following information will be helpful.
Chick-fil-A is fortunate to have many loyal customers. Many of these fans take the time and effort to inquire about sharing their own ideas about ways they wish to see us improve – whether it is adding a specific new product, service or feature. We are grateful for our customers’ intent, and this motivates us to work even harder to keep improving.
Unfortunately, it is our corporate policy not to accept or consider any unsolicited creative ideas. This is a difficult decision because we realize that by following this policy, Chick-fil-A may miss out on some great ideas from our customers. We would rather miss out on some of these ideas than to risk any potential future misunderstanding should Chick-fil-A develop or already have developed a product, service, or feature that may seem similar to a customer’s idea.
We hope you will understand the reasons for our policy. You can view our Unsolicited Ideas Policy at www.chick-fil-a.com/Legal (under Submissions) for more information on this issue. Beyond this policy, we gladly welcome customers’ feedback about their restaurant experiences.
We appreciate your family’s loyalty, and we look forward to serving you all at Chick-fil-A for many years to come. Again, thank you for your time and interest in Chick-fil-A.
From: <me@my.email.address>
Date: Thu, Dec 27, 2012 at 4:56 PM
Subject: Re: Chick-fil-A Response
To: Chick-fil-A CARES <chickfilacares@na.ko.com>
Hello Cheala,
Any idea how I can get my idea solicited? I’m honestly not interested in monetary compensation, I just don’t want to spill my drinks. Has anyone run this by Mr. Cathy? He’s responded to my emails before, and I understand that he’s a shrewd business man as well as a great family man. I’m sure he wouldn’t want drinks spilling on anyone… and that he’d like to pick up a free idea.
Thanks once again for your time & help!
My pleasure,
-Eric
Wonder if I’ll get a reply? I just want a good cup holder.
I have an idea for you. I realize that as a giant corporation you probably don’t accept unsolicited ideas, but please don’t let that stop you from considering this idea. I don’t expect monetary payment, maybe just free Chick-fil-A for life? (Maybe a limit to once a week?) Well, I guess I should present my idea before we start talking payment or barter.
This past Saturday I went to the Chick-fil-A inSouth Hills to grab some of those ridiculously delicious Chick-n-Minis™ for breakfast. I went into the store to order take-out so I could grab some mayo packets, ketchup, straws, & napkins at the little condiment station. I got two drinks because I was taking breakfast home to share with the wife. I opted for your highly addictive sweet tea, and the wife had a Hi-C Fruit Punch. The always courteous employees offered me a drink carrier, and I accepted. I thought it would make life easier on the ride home. I saw wrong.
I set the drink carrier on the floor of the passenger’s side of my truck. As I backed out of the space, it fell over on to the long side. Your drink lids are thankfully quite tight, but sadly not entirely waterproof. I leaned over and placed the carrier & drinks upright again, this time turning the drink holder 90 degrees the other way thinking I had outsmarted the laws of physics and that it would stay put. I could not have been more mistaken. As I turned up a hill to go out the back of the parking lot, it fell again. I believe I uttered something using vocabulary that you may not approve. At the stop sign, I had to pick up the cups and give up by putting them in the truck’s drink holders.
As I drove home trying not to think about the drops of Hi-C & iced tea soaking into my floor mats, I wondered if there was a better way. I certainly like your drink carriers much better than the egg-crate 4 space things that just let cups lean over all willy-nilly. I came to think that your drink carriers just need feet. I thought the feet may take some extra cardboard, and wondered i something could be done with the existing design.
At home, my thoughts were fueled by poultry protein. I pulled out my pocket knife and started cutting as my wife looked at me like I was a crazy person (as she does quite often). I explained what I was doing and why and she actually also thought it was a good idea.
You already have some nice sturdy cardboard. Two well-placed quarter-circle cuts & maybe even a fold mark in the middle of the carrier would create some nice sturdy feet or “wings” or your drink carrier box without the need for a complete redesign or any additional material. I tested it by trying to rock the mostly empty drinks back & forth on the kitchen table. We had no spills. I am willing to try some field tests if you’d like to move forward with this idea. My truck’s floor mats can handle it. Perhaps I can even use water instead of red & brown sugary liquids.
I’m sure we could talk to your box people & find out if this is doable for a reasonable price. I think it will be as important & innovative as the new Heinz® Dip & Squeeze® packets! I have some photos attached that I’m sure you will agree are quite illustrative of my design ideas. Sadly, my pocket knife is a cheap dull one, so the cut looks more like a rip. I believe you’ll see my intent though.
I look forward to hearing your thoughts, and am excited at the opportunity that lays before us. It would be my pleasure to help make this dream a reality!
So, there we have it. I mean, most of my letters are plain goofy, and this has a goofy tone, but really… don’t you think this would work? Now, we wait for a response.
World (and Lunar) Domination 