Tag Archives: tone pot

So, now what? (Customizing my New York Pro, finally.)

Posted on by Standard 3

So, this past weekend, I finally got a chance to work on customizing my New York Pro, I thought I’d get a bunch of it done all at one time.  Well, I hit a roadblock or two as I was taking it all apart.  (Of course.)

I already got some great advice via Facebook, but thought I’d try & chronicle everything here.

It doesn't fit...

It doesn’t fit…

Once I got my work bench set up on the basement, taking everything apart was quite easy.  I just took out all the hardware, and when I went to line up the new pickguard, it didn’t fit. It’s really close, but it doesn’t fit.  I’m going to have to file or cut or sand or Dremel or some combination of all of the above.

It's not the same...

It’s not the same…

The holes in the pickguard aren’t going to lineup with the screws, either.  I’m going to have to maybe 2-sided tape it in place to mark all the holes once I get it cut right.  I have no experience taking apart guitars, but it’s odd that the neck doesn’t fit “perfectly” into the body.  There’s a weird gap there.  It’s also easy to tell (now) that the old pickguard has been cut.  There are some other spots where it doesn’t quite line up.  I hope I don’t have to route anything out where the pickups go.  I got them all from the same place, so I hope not.

Also, I thought I was taking the neck plate off… but it wasn’t having it:

That's supposed to come off when you take the screws out...

That’s supposed to come off when you take the screws out…

Help?

Help?

It’s stuck.  I feel like it’s glued on or was put on before the stain dried?  I bought all black hardware, including a neck plate.  Should I try to get this one off, or just let it go?  I even tried to pop it off using  a screwdriver through the 5th larger hole… all to no avail.

Any advice on that one?

If you’re interested in checking out my progress, take a look at the Photobucket album that’s my attempt to chronicle the whole thing.  (Or, sit through this slideshow…)

Related Articles

Have any soldering or guitar wiring advice?

Posted on by Standard 8

I still haven’t done anything with my box of goodies from Guitar Fetish to beat up that New York Pro Strat clone.  It’s not that I’m nervous, I just haven’t had time to sit down & get it done yet.   I’m also still open to any tips/tricks/advice.

I wrote to Joe Gore of the Tone Fiend blog (if it’s not in your reader, it should be) and he gave me a cool link to videos (besides the ones on his killer DIY page)…  Installing Pickups.

I also recently came across these cool blog posts from Guitar WTF (another good follow!):

I did buy one of these from Harbor Freight…

Jumbo Helping Hands with LED Lights (item#65779 )

Think it will help?  Everyone seems to say it will. I might need a sponge too?

I’ve gotten some decent tips from Facebook, SMG, and Misfits Central.  What else do I need to consider as far as pots & capacitors?

How would you connect the dots here?  What pots & capacitors would you use?

How would you wire this?

How would you wire this?

Should I do the 7-sound thing?  What if I want the neck & the bridge both on at once?

Should I replace the pots while I’m in there?  How do I tell if they’re 250k or 500k?

I’m guessing a wiring diagram with my proposed setup doesn’t already exist out there, not even at Stew-Mac.  Looks like these cats will make one for $30, but I think I can do that myself.  (Although a very rough one.)

I need a crash course in guitar wiring, I guess.  Ha ha.

I also might try to setup a work bench/space in the basement so I don’t ruin the dining room table.

What about a push-pull pot with a poor man’s Black Ice circuit?

Should I get a book?

I know I’m over-thinking this.  There’s too many options.  Ha ha.

Related articles